Tag: raspberry
This should be a simple task - to properly setup fan control on Raspberry
Pi 4 Model B Rev 1.1 running Raspberry Pi OS 64-bit based on Debian
Bookworm, released 2024-11-19.
Powered via PoE hat. Looking around, I have soon found out there are like
million guides and all of them di…
This post is a part of a series about the TouchBerry ModbusRTU autoflow
issue and how have I resolved it. Other posts of the series can be found
under the touchberry tag. Note that newer posts might
contain more recent information.
Throughout the series I have been investigating …
I have bought a handful of
40 pin IDC connectors
for a flat cable. I wanted to use them on the cheap, colorful, no-datasheet
40-pin flat cable bought a long ago from Ebay that I had lying around. The
idea was to use it to extend the Raspberry 40-pin header with a cable to
tinker …
This post is a part of a series about the TouchBerry ModbusRTU autoflow
issue and how have I resolved it. Other posts of the series can be found
under the touchberry tag. Note that newer posts might
contain more recent information.
I've spent past few days fighting two things: he…
I have had a problem with the gpio command on Raspberry Pi 4. Checking
it's version with gpio -v produced the following output:
gpio version: 2.50
Copyright (c) 2012-2018 Gordon Henderson
This is free software with ABSOLUTELY NO WARRANTY.
For details type: gpio -warranty
Raspber…
This post is a part of a series about the TouchBerry ModbusRTU autoflow
issue and how have I resolved it. Other posts of the series can be found
under the touchberry tag. Note that newer posts might
contain more recent information.
It is quite hard to do a lot of effective work i…
This post is a part of a series about the TouchBerry ModbusRTU autoflow
issue and how have I resolved it. Other posts of the series can be found
under the touchberry tag. Note that newer posts might
contain more recent information.
With the access to the
TouchBerry 10"
model incl…